Green Cell Uninterruptible Power Supply UPS 2000VA 1200W with LCD Display | EU VERSION | 4x Schuko Sockets

Order today to receive on:
Friday, 09.06.23
  • The Green Cell UPS emergency power supply provides full protection for any connected equipment during power loss and power spikes. With it you can safely save your work and safely switch off the device.
  • With a total power of 1200W and an apparent power of 2000VA, the UPS is equipped with Green Cell AGM batteries which provide stable parameters for your equipment.
  • Using the latest technology, we have achieved a maximally short time to switch UPS into battery power mode of 2-6 milliseconds and a back-up time of even 50 min depending on the load.
  • Original software provides comprehensive to manage the UPS from the computer. The application ensures simple and intuitive use without any problems. Download HERE.
Goods available.
169,95 €
What is a UPS?
What is it used for?

An uninterruptible power supply unit (UPS) is a device whose purpose is to provide power when our apartment or workplace runs out of electricity. Sudden power cut can cause loss of important data, but also damage to electronic equipment. Thanks to an emergency power supply you will be given time to save the effects of your work and safely switch off the device. UPS can take over the role of a mains socket and provide backup power even in the event of large and long-lasting voltage fluctuations. When there is current in the socket, the UPS accumulates energy in the battery and thus provides the devices connected with appropriate surge protection.

Alarm systems
Always under control

In order to make it possible to use of the functions of a Green Cell UPS, special dedicated software has been created to enable advanced management of the device. The application ensures simple and intuitive use without any problems. The program enables preview in real time and displays measurement data including input and output voltages, load frequency of the UPS, its temperature and battery capacity. You can setup automatic system shut-off, notifications and email warnings in the event of switching to batter operation. You can find out about these and other functions by downloading the software HERE.

With attention to detail

When designing our UPS’s, we took care of every aspect. By combining maximum functionality with unique design we created a device that will look great in every setting. What is more, to make using the UPS more comfortable we equipped it with an easy-to-read LCD display which will inform you about many parameters that are essential for the operation of the supply.

Type of UPS

Line interactive: UPS’s with line-interactive AVR topology are an improved version of offline power supply. They have been equipped with an automatic voltage stabiliser which protects not only against loss of supply voltage but also against line interference. These power supplies guarantee full security of all equipment connected to the UPS.

Essential parameters
Power rating

This informs you how many and what sort of devices the UPS is able to supply with electricity. In order to meet users’ requirements, Green Cell UPS’s have been equipped with top quality AGM batteries which can have a lifetime of up to 5 years of operation and thereby ensure the best efficiency.

Switching time

It determines how quickly the UPS will respond to power outages. The lower its value, the better the UPS. Uninterruptible Power Supplies by Green Cell guarantee the lowest switching times, so they immediately respond to power outages, ensuring complete security and safety for your documents and devices.

Why a modified sine wave?

The use of a modified sinusoid ensures a simple UPS construction, thanks to which has less failure and its weight is very low. Choosing a modified sine wave, you do not have to worry about the work of connected devices!

  • LCD Display
  • 4x Network output (Schuko)
  • USB port
  • RJ45 sockets
  • 1x IEC
GC PowerProof
GC PowerProof
GC PowerProof
GC PowerProof
GC PowerProof
GC PowerProof
GC PowerProof
GC PowerProof
GC PowerProof


Battery 2 x 12V/9Ah
Power 1200W
Condition New
Warranty 24 months (12 months for battery)
Manufacturer Green Cell
Dimensions 380x158x198mm
Weight 11.5kg
Type Tower
Input Voltage 220/230/240 V
Input frequency 50/60 Hz
Output Voltage 230V AC
Output frequency 50Hz or 60Hz (automatic detection)
Response time 2-6 ms
Sine wave type Modified sine wave
Return policy up to 30 days
Charging time 6-8 h
Communication USB
Sockets 4x Schuko + IEC
Apparent power 2000VA-3000VA
Topology Line-Interactive AVR
Protections thermal, overvoltage, short-circuit
Protection against overvoltage RJ45
Product code UPS05
Average rating: 4.0 (2 opinions)
star star star star star
50% (1 opinion )
star star star star empty-star
0% (0 opinions)
star star star empty-star empty-star
50% (1 opinion )
star star empty-star empty-star empty-star
0% (0 opinions)
star empty-star empty-star empty-star empty-star
0% (0 opinions)
To add a comment, you must be logged in and have the purchased product.

Thank you for adding your opinion, soon it will be available on the product card.

See all comments
Select a language:
Comment confirmed by purchase

Comment confirmed by purchase

star star star star star

Ups worth the price. It runs w/o a problem PC, STB, monitor,bunch of hdd, printer and other stuff, even electric heater. The software is old style but working fine, you need to select Mega(usb) in the settings and UPS will be detected. On website you can download v5.0, but there is v5.4 on the web, which is the lastest.
Only one thing, the LED display on ups is very bright.

Comment confirmed by purchase

Comment confirmed by purchase

star star star empty-star empty-star

UPS spełnia świetnie swoje zadanie.

Dwie gwiazdki odejmuję jednak za problem z piskiem. Przy niskim obciążeniu słyszalny jest ciągły, głośny pisk. Jako majsterkowicz, zamiast wysyłać sprzęt na gwarancję (która, z opinii innych osób, nic by na to nie pomogła) postanowiłem zajrzeć do środka i zlokalizować źródło pisku. Okazał się być nim wiatrak, prawdopodobnie przez specyficzne sterowanie prędkością wiatraka (nie jest to typowy wiatrak PWM, możliwe że przetwornica sterująca prędkością wiatraka na płycie głównej pracuje na słyszalnych częstotliwościach) jego cewki zaczynają piszczeć. Rozwiązaniem okazało się rozebranie wiatraka (stosunkowo łatwe) i zalanie cewek ,,kropelką'' (dobrze wsiąka między uzwojenia). Można również powierzchniowo zalać żywicą epoksydową, jednak należy uważać aby nie wystawała i nie przeszkadzała części ruchomej. Początkowo było słychać jeszcze delikatny pisk, który po kilku dniach ucichł całkowicie.